Contrary to the non-UEFI AMI BIOS the important “Option ROM” modules of the AMI UEFI BIOS files are hidden and cannot be seen by opening the BIOS file.Below you will find the specific guides for both sorts of BIOS modules. Intel RAID or LAN ones) while running in LEGACY mode, need to be extracted, replaced and inserted another way than EFI modules and other ( non-Option ROM) BIOS modules. So-called “Option ROM” modules, which are managing certain on-board Controllers (e.g. The extration procedure depends on the sort of the BIOS module you want to get extracted.In this case you have to use the AMI MMTool v3.26 and to follow the instructions you will find >here<. If the Aptio UEFI MMTool should not able to open the AMI BIOS file, it is not an AMI UEFI BIOS. Now the Aptio MMTool GUI will look like this: Now you should see the prepared "clean" BIOS file. Hit the "Load Image" button, browse to the folder with the AMI UEFI BIOS file you want to open and choose the correct "Files of Type".Run the AMI Aptio UEFI MMTool v4.50.0.23 named MMTool.exe as Administrator.This is the way to open an UEFI BIOS file: The UEFI type AMI BIOS files can easily be identified by their big size (minimum: 4 MB, usually ca. Opening of an AMI Aptio IV UEFI BIOS file a currently empty sub-folder named “extracted”, where you can put the extracted BIOS modules later on during/after your BIOS processing work.Ģ.a sub-folder named “desired”, where you can store the BIOS modules, which you want to get into the BIOS and.D:\BIOS-MOD) and to copy both files (the MMTool and the BIOS) into it. Tip: To make the BIOS processing clearly arranged for you, I recommend to create a sepate folder (e.g. If the BIOS has been offered inclusive installer and Flash Utility (as EXE file, it has to be extracted by using an appropriate tool. The “clean” (uncompressed) BIOS file you want to modify.Usrs, who want to use this modded variant, should do a Google search for “MMTool Aptio Mod”. The original tool is only usable with AMI Aptio V BIOSes, but it exists a “patched” variant of it, which works with nearly all AMI Aptio IV BIOSes as well. This is the currently latest AMI UEFI MMTool version. “AMI Aptio V UEFI MMTool v5.2.0.24” (dated ).It works with not capsuled Aptio IV BIOSes as well (exception: CPU Microcode updates), but the MMTool v4.50 seems to be the better option for them. The MMTool v5.0.0.7 has been primarily been designed for Aptio V platform BIOSes (from X99 and 100-Series Chipset mainboards up). The link to this tool has been removed here upon demand of American Megatrends Inc (AMI), but you may find it, if you do a Google search for “MMTool Aptio ”. “AMI Aptio V UEFI MMTool v5.0.0.7” (dated ).This UEFI MMTool version is recommended for the manual BIOS modding of AMI Aptio IV BIOSes (all AMI UEFI BIOSes up to except from Intel X99 mainboards). (AMI), but you may find it, if you do a Google search for “MMTool Aptio ”. The link to this tool has been removed here upon demand of American Megatrends Inc.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |